Realigning The Pattern - Brother Innov-ís 1250D Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
UTILITY STITCHES
Deleting a saved pattern
Saved pattern in the pockets can be deleted.
a Press .
Select the pocket where the pattern you wish
b
to delete is stored.
indicates pockets where patterns are
already saved.
The selected pocket is shown in reverse
highlighting, and the saved pattern is
displayed.
Check the contents, then press
c
The confirmation message is displayed.
Press .
d
The saved pattern and the pocket are deleted.
136

Realigning the pattern

The pattern may not be sewn correctly, depending on
the type of fabric being sewn or the sewing speed. If
this occurs, adjust the pattern while sewing on a
piece of scrap fabric that is the same as that used for
your project.
a Attach monogramming foot "N".
• For details, refer to "Replacing the presser
foot" (page 44).
b Press
panel, and select
.
The screen containing the various decorative
stitches appears.
c Select
The pattern alignment stitch is selected.
(Utility stitch key) on the operation
(Decorative stitch).
.