Brother Innov-ís 1250D Operation Manual page 82

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
UTILITY STITCHES
e Press .
Note
The next time that the same straight stitch is
selected, the stitch length is set to 2.0 mm.
All stitch settings (stitch width (zigzag
width), stitch length, thread tension,
programmed thread cutting, and automatic
reverse/reinforcement stitching, etc.) are
saved, not just the setting that was changed.
When the same stitch pattern is selected, the
last settings saved are displayed even if the
machine was turned off. If the settings are
changed again, or if
the setting to its default, the new settings are
not saved unless
time.
Even if is pressed, the settings for
programmed thread cutting and automatic
reverse/reinforcement stitching cannot be
reset.
80
is pressed to reset
is pressed another