Changing The Pattern Size; Changing The Stitch Density - Brother Innov-ís 1250D Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Changing the pattern size

The size of character stitches in the Gothic font and
outline style, decorative stitches, and decorative satin
stitches can be switched between large and small.
However, the size of other patterns cannot be
changed.
a Select a stitch.
• For details on selecting a stitch, refer to
"Selecting stitching" (page 77).
Press
b
c Repeat steps
Memo
The large pattern size is the default. If the
small pattern size is selected, small patterns
can be combined and connected.
If multiple patterns have been combined, the
size of each selected pattern can be
specified.
until the desired size is selected.
a b
and .

Changing the stitch density

If a decorative satin stitch has been selected, the
stitch density can be changed.
a Press (Utility stitch key) on the operation
panel, and select
b Select a decorative satin stitch pattern.
c Press until the desired stitch density is
selected.
Select for sparse stitching, or select
for compact stitching.
CAUTION
If the stitching density is too compacted,
depending on the needle, the stitches may
be bunched together, causing the needle
to break.
Sewing the Various Built-in Decorative Patterns 129
(Decorative satin stitch).
3