Setting Up Slide Shows On The Camera - Canon PowerShot A310 Software User's Manual

Appendices
If the camera comes with a slide show feature, you can use
ImageBrowser to edit slide shows.
IMPORTANT
• Ensure that the camera and computer are connected with an
interface cable and are ready to communicate before you
perform this procedure.
REFERENCE
• For detailed information on how to use a slide show and display
images, refer to the Camera User Guide that comes with your
camera.
How to set up a slide show
In the Camera Window, click
When the following window appears, select the [Slide Show]
option that appears on the top left part of the window. Then,
use the list below to select a slide show number.
Select a slide show number.
104
ImageBrowser Software User Guide

Setting up Slide Shows on the Camera

(Slide/DPOF).
Click here.
From the image list on the left, drag images to the right area
and arrange their sequence for the slide show.
When you are done arranging the slide sequence, click [Save to
Camera] to save the slide show setup.
Drag images from the image list on the left to the area on the
right and arrange their sequence for the slide show.
REFERENCE
• If you want to change the sequence of some images, just drag
them to the right place in the area on the right.
• If you want to remove an image from the slide show, select the
image. On the [Edit] menu, click [Clear].