Canon PowerShot A310 Software User's Manual page 5

Chapter 1
Try It! ImageBrowser
REFERENCE
• You can also start ImageBrowser automatically without starting
iPhoto or Image Capture when you connect the camera to the
computer. See the Starting ImageBrowser Automatically (Mac
OS X Only) topic in the Appendices for information on this
topic.
• Depending on the selections you make during installation, the
Canon ImageBrowser icon may not appear on the desktop. In
this case, start ImageBrowser by double-clicking on the applica-
tion using the following sequence.
Locate and open the [Canon Utilities] folder, then open the
[ImageBrowser] folder and double-click on the [ImageBrowser]
icon.
4.
Click [Canon Camera] in the Explorer View section.
5
ImageBrowser Software User Guide
Starting ImageBrowser (2/5)
Explorer View Section
A dialog similar to the one below will open. (This dialog will
only appear the first time the program is started.)
5.
Confirm that [USB Port] is selected in the [Port] cat-
egory and that your camera model name or [Canon
Camera] is selected in the [Detected Camera] category
and click [Set].
6.
Close iPhoto or Image Capture if either program starts
up.
The Camera Window will open and display the images in the
camera.
Your camera model name
or [Canon Camera] and
the USB port number (i.e.
@1) appears here.