Canon PowerShot A310 Software User's Manual page 44

Chapter 5
Using the Camera Window
■
Drag-and-drop
Drag an image in the Camera Window and drop it into a folder
in the Browser Window. The image is then imported into
ImageBrowser. Further, you can import an image directly into a
recognized folder by dragging an image in the Camera
Window and dropping it into a folder in the Explorer View
Section.
■
Importing multiple images
You can select several images by holding down the [shift] key,
or the [option] + [shift] keys, and clicking the images you want
to import. When the images are selected, perform the
importation. All the images that you selected are imported.
■
Importing all the images
Click (Select) and click [Select All] on the menu. All the
images of the folder are selected and when you perform the
importation procedure, they are all imported at once.
REFERENCE
• If an image is taken in the Stitch Assist mode, it appears in the
Camera Window as follows:
44
ImageBrowser Software User Guide
Downloading Images (2/2)
This mark indicates that
the image was taken in
the Stitch Assist mode.
(You can click the wavy
line to start PhotoStitch.)
• If an image is taken in the RAW mode (some camera models do
not come with this feature), it appears in the Camera Window
as follows:
• If an image is taken in the Movie mode, it appears in the Cam-
era Window as follows:
• If an image has a sound memo attached (this feature is not
available on some models), it appears in the Camera Window
as follows:
This mark indicates that
the image was taken in
the RAW mode.
This is the mark that
indicates a movie.
This is the mark that
indicates a sound memo.