Finishing The Installation - HP D7171A - NetServer - LPr Upgrade Manual

Chapter 2 HP NetServer LH 3000/3000r: Installing a Power Supply and Fan

Finishing the Installation

To finish the installation, do the following:
1. Replace the covers and bezel.
2. Replace all power, telephone, and I/O cables that you disconnected earlier.
3. Install the new power cord shipped with this upgrade kit. This power cord
connects to the cage that holds power supplies 3 and 4.
4. Turn on power to the NetServer and check the LEDs on each power
supply. When a power supply is operating correctly, its LED glows steady
green.
10