Power Supply Cage Installation - HP D7171A - NetServer - LPr Installation Manual

Chapter 2

Power Supply Cage Installation

Before installing the power supply cage, remove covers 1 and 3 as described in
Chapter 1.
To install the cage, follow these steps:
1. Loosen the two Torx screws on the front panel to be removed cabinet
(see Figure 2-1).
2. Remove the fan module behind the power supplies. To remove the fan
module, loosen the thumbscrew, then pull the fan assembly out of the
cabinet using the handle. See Figure 2-1.
10
Cage and Power Supply Installation
Fan Module
Figure 2-1. Fan Module Removal