HP D6030A - NetServer - E50 Getting Started page 19

Chapter 4
The Wizard displays the Drive Selection window listing HP NetServer
drives that are available for backup.
By default, each drive appears with a red check mark indicating that it is
designated for backup.
5. Click the drive icons in the drive list to deselect the drive or drives that
you don't want backed up. For example:
IMPORTANT The Wizard won't permit you to choose more data than it
estimates will fit on a tape in a compressed form (8 GB). If it
detects a problem, a warning message appears, asking you
reselect the drives.
6. Click Next to proceed to the Backup Schedule window where you set the
time of day for the backup, and select either a five-day or seven-day
schedule for daily backups.
Figure 4-2. Drive Selection Window
Configuring An Automatic Backup
15