Quick View - HP D6030A - NetServer - E50 Getting Started

1 Quick View

This chapter provides a summary table for quickly finding procedures in your
Getting Started With Stac Replica™ Backup HP SureStore Tape Edition. If you
are an experienced network administrator, you can also use the table as a quick
reference guide to the procedures in the document.
Shortcut
icon Task
Install Replica
1. Prepare to install Replica.
2. Install the Replica software.
Configure Replica for automatic backups
1. From the desktop icon or Start menu,
open the Configuration Wizard
shortcut.
The Wizard walks you through the
configuration procedure, prompting
you to select a tape drive, choose
drive volumes for backup, and
schedule a time for the backup.
Perform an "off-schedule," immediate backup
1. Insert a blank tape cartridge in the
HP NetServer tape drive.
For more information
See Chapter 3 for a list of
requirements for the version of
Replica that supports your HP
NetServer's operating system.
See Chapter 3 for instructions on
installing the version of Replica
that supports your HP NetServer's
operating system.
See Chapter 4 for detailed
instructions on configuring a
backup under Windows NT or
NetWare.
See Chapter 4 for detailed
instructions on performing an
immediate backup under Windows
NT or NetWare.
1