Restoring Files (Windows Nt) - HP D6030A - NetServer - E50 Getting Started

Chapter 5
NOTE Replica is optimized for backing up and restoring volumes of
data files. To guard against loss of a system volume through
catastrophic disk failure, you can upgrade to a commercial
version of Replica that supports system volume recovery. (For
information on upgrading Replica, see the section, "Upgrading
Replica for System Volume Protection," in Chapter 1.)

Restoring Files (Windows NT)

By mounting the appropriate backup tape as a volume on your HP NetServer, you
can quickly restore individual files and folders--without having to perform
tedious partitioning and formatting of disk to receive the restored data.
Follow these instructions to restore files from a mounted tape volume to an HP
NetServer running Windows NT. For an HP NetServer running NetWare, skip to
the "Restoring Files (NetWare)" section later in this chapter.
1. Insert the tape cartridge containing the backed up files in the tape drive.
2. From the desktop or Start menu under the Replica Program Group, open
the restore files shortcut.
Replica starts, immediately displaying the Mount Tape window. For
example:
26
Figure 5-2. Mount Tape Window
Restoring Files and Folders