Creating A Backup Configuration (Netware) - HP D6030A - NetServer - E50 Getting Started

Chapter 4
The window displays summary information for the backup configuration,
including the volume(s) designated for backup and the target tape drive.
12. Click Finish to complete the setup.
Replica displays a message indicating that it is updating the Wizard
backup job.
When the update is complete, the configuration you created with the Wizard
becomes the default backup configuration--Replica automatically performs the
verification and backup at the scheduled time.
NOTE In addition to the automatic backup you configured with the
Wizard, you can also perform an immediate, unscheduled
backup of the same volumes you selected in the configuration.
For more information, see the section, "Performing an
Immediate Backup," later in this chapter.

Creating a Backup Configuration (NetWare)

The configuration Wizard is your starting point for setting up your Replica
backups. With the Wizard, it is easy to create a configuration that backs up
specified server volumes on a regular schedule.
The Wizard walks you through a complete configuration--prompting you to
identify the location of the tape drive, choose the volumes that you want backed
up, and specify a time of day for the backup to occur.
18
Figure 4-6. Backup Summary Window
Configuring An Automatic Backup