HP D6030A - NetServer - E50 Getting Started page 18

Chapter 4
Follow these instructions to create a default configuration for automatic backup
of an HP NetServer running Windows NT. For an HP NetServer running
NetWare, skip to the "Creating a Backup Configuration (NetWare)" section later
in this chapter.
1. Insert a blank tape cartridge in the HP SureStore T4 tape drive.
2. From the desktop or Start menu, open the Configuration Wizard
shortcut.
The Wizard starts and displays a welcome screen.
3. Click Next to go to the Tape Drive Selection window where you identify
the tape drive you'll be using for backups.
Figure 4-1. Tape Drive Selection Window
IMPORTANT
In the Tape Drive Selection window, the HP SureStore T4 tape
drive is identified as an HP T4000s drive. Only SureStore
drives with the T4000 designation will work with Replica.
4. Choose a tape drive from the menu of available tape drives, then click
Next.
NOTE
If the tape in the selected drive contains data from a previous
Replica backup, the Wizard asks you to confirm the
overwriting of the data based upon the new configuration.
14
Configuring An Automatic Backup