Other Notes - HP StorageWorks 2/128 - SAN Director Switch Release Note

Important Notes
Table 2: Limitations Using Mixed OS Versions (Continued)
Launch Switch Environment
Firmware: Fabric OS v2.6.2, v3.1.2, or
v4.2.x
Operating System: any supported
operating system (with supported
browser)
Browser: any supported browser (on a
supported operating system)
Firmware: version earlier than Fabric OS
v2.6.2, v3.1.2, or v4.2.x
Operating System: Solaris
Browser: Netscape
Firmware: version earlier than Fabric OS
v2.6.1, v3.0.x, or v4.0.x
Operating System: Windows
Browser: Internet Explorer

Other Notes

Table
12
The Name Server table does not display properly for
a switch running firmware versions earlier than Fabric
OS v2.6.2, v3.1.2, or v4.2.x.
Workaround: If secure mode is enabled, select a
switch running Fabric OS v2.6.2, v3.1.2, or v4.2.x or
later as the primary FCS switch. If secure mode is not
enabled, use a launch switch running Fabric OS
v2.6.2, v3.1.2, or v4.2.x or later to access the Name
Server table on the switch.
Any switches running Fabric OS v2.6.2, v3.1.2, or
v4.2.x or later are not supported through Netscape.
Workaround: Netscape is not a supported browser
for switches running Fabric OS v2.6.2, v3.1.2, or
v4.2.x or later. Use Mozilla browser to manage all of
your switches from a Solaris operating system. See
Table 1
When you are running Fabric View, the browser
crashes.
Workaround: Use a launch switch that runs Fabric OS
versions v2.6.1, v3.0.x, or v4.0.x or later so that you
can use Switch Explorer (instead of Fabric View).
3, Table 4, and Table 5
Issue and Workaround
supported browsers.
list important information for Fabric OS v4.2.x.
SAN Director 2/128 Fabric OS 4.2.x Release Notes