Supported Switches; Technical Support - HP StorageWorks 2/128 - SAN Director Switch Release Note

Documentation
Improvements
The following improvements have been made to the Fabric OS software since the
last HP 4.x release:

Supported Switches

Fabric OS v4.2.x supports the HP StorageWorks SAN Switch 2/8V, 2/16N, 2/16V,
2/32, Core Switch 2/64, and SAN Director 2/128.

Technical Support

Contact Hewlett-Packard support for hardware, firmware, and software support,
including product repairs and part ordering. To assist your support representative
and to expedite your call, have the following information available when you call.
Documentation
This section discusses documentation associated with the Fabric OS 4.2.x.
4
Secure Telnet may now be connected with two LAN cards.
Improvements have been made to the reboot code.
Problems that caused compaqt flash full have been resolved.
We have increased the number of HBAs that can be displayed by Web Tools.
We have improved the reliability of firmware download on an active fabric.
A firmwaredownload is now successful to a single CP SAN Director
2/128 chassis through Fabric Manager and Web Tools.
Web Tools events now use adjusted timezone time, rather than coordinated
universal time (UTC).
Technical support contact number, if available
Switch model
Switch operating system version
Error messages received
Output from supportshow command
Detailed problem description and specific questions
Description of any troubleshooting steps already performed and results
SAN Director 2/128 Fabric OS 4.2.x Release Notes