Documentation Updates - HP StorageWorks 2/128 - SAN Director Switch Release Note

Commands Modified in v4.2.x
Commands Modified in v4.2.x
The portCfgLPort command now supports a mode2 option. Specify 1 to
configure the L_Port as a half-duplex L_Port. Specify 0 to configure the L_Port as
a full-duplex L_Port. The default value is 0.
Refer to the HP StorageWorks Fabric OS 4.2.x Command Reference Guide for
more information.

Documentation Updates

This section provides information on last-minute additions or corrections to the
documentation.
HP StorageWorks Fabric OS 4.2.x Command Reference Guide
The following commands have been modified:
Each change is detailed in the sections that follow.
configure
Change the Domain, R_A_TOV, and E_D_TOV fields in Table 2 as follows:
Domain
R_A_TOV
E_D_TOV
portCfgLongDistance
Add a note regarding coexistence with the portCfgislMode command, as
follows:
20
configure
portCfgGPort
portCfgLongDistance
portCfgislMode
Field Default
1
10000
2000
Range
Varies
E_D_TOV * 2 to 12000
1000 to R_A_TOV / 2
SAN Director 2/128 Fabric OS 4.2.x Release Notes