Modifying An Snmp V3 User; Removing An Snmp V3 User; Testing A Switch; Snmp V3 User Editor Dialog Box Fields - HP StorageWorks SN6000 User Manual

Table 14

SNMP v3 User Editor dialog box fields

Field
User Name
Group
Authentication Type
Authentication Phrase
Confirm Authentication
Phrase
Privacy Type
Privacy Phrase
Confirm Privacy Phrase
5. Click OK to save the settings and close the SNMP v3 User Editor dialog box.
6. In the SNMP v3 Manager dialog box, click OK to save and activate the SNMP v3 security
configuration.

Modifying an SNMP v3 user

To modify an SNMP v3 user:
1. Select the entry switch in the fabric tree.
2. Select Switch > SNMP > SNMP v3 Manager to open the SNMP v3 Manager dialog box
3. Select a user in the user list, and select Edit > Edit User to open the SNMP v3 User dialog box.
4. Modify the entries as needed, and click OK. For information about the entry fields, see
5. Click OK to save the settings and close the SNMP v3 User Editor dialog box.
6. In the SNMP v3 Manager dialog box, click OK to save and activate the SNMP v3 security
configuration.

Removing an SNMP v3 user

To remove an SNMP v3 user:
1. Select the entry switch in the fabric tree.
2. Select Switch > SNMP > SNMP v3 Manager to open the SNMP v3 Manager dialog box
3. Select a user in the user list, and select Edit > Remove User.
4. Click Yes to remove the user; click Cancel to cancel the removal.
5. Click OK to save the settings and close the SNMP v3 User Editor dialog box.
6. In the SNMP v3 Manager dialog box, click OK to save and activate the SNMP v3 security
configuration.

Testing a switch

The Switch Diagnostics dialog box
switches (online and offline). To open the Switch Diagnostic dialog box, open the Switch menu, select
Switch Diagnostics, and then select Online Switch Diagnostics or Offline Switch Diagnostics. For each type
of test, only one switch at a time can be tested. Offline Diagnostics can only be selected for the entry
switch.
The diagnostic tests are:
72
Description
Name assigned to this SNMP v3 user.
Sets user's Read privileges: Read Only permits user to view
only SNMP v3 user settings, Read Write permits user to view
and change SNMP v3 user settings.
None, MD5, SHA. If None, no authentication phrase is
required. MD5 and SHA require an authentication phrase.
A unique string or phrase that functions as a password that
verifies the authenticity of the user.
Re-enter the Authentication Phrase to confirm it.
DES or None. If None, no privacy phrase is required.
A unique string or phrase that functions as a password that
verifies the privacy of the user.
Re-enter the Privacy Phrase to confirm it.
(Figure 36) enables you to test and verify the operational status of
(Figure 34).
Table 14.
(Figure 34).