Using Quicktools; Workstation Requirements; Opening Quicktools - HP StorageWorks SN6000 User Manual

1

Using QuickTools

This section describes how to use the QuickTools web applet and its menus.

Workstation requirements

The requirements for fabric management workstations running the QuickTools web applet are described in
Table 1.
Table 1

Workstation requirements

Component
Operating systems
Memory
Processor
Internet Browser
Hardware
1. You must disable caching of temporary files and applets in Java to prevent conflicts with past or future versions
of QuickTools. Furthermore, you may need to disable caching again after upgrading Java.
IMPORTANT:
conflicts with past or future versions of QuickTools. Also, caching may become enabled if the Java version
is upgraded, so you may need to disable caching again after a Java upgrade.

Opening QuickTools

Once the switch is operational, open the QuickTools web applet.
To open the QuickTools web applet:
1. In an Internet browser, enter the switch IP address (the default switch IP address is 10.0.0.1). (If your
workstation does not have the Java 2 Run Time Environment program, you will be prompted to
download it.)
Options/Requirements
Windows XP SP1/SP2/SP3
Windows 2003 SP2
Windows 2008 SP2 and R2
Red Hat Enterprise Linux 4, 5
SUSE Linux Enterprise Server 9, 10 and 11
512 MB or more (1GB recommended)
2 GHz or faster
Microsoft Internet Explorer 6.0 or later
Netscape Navigator 6.0 and later
Firefox 1.5 and later
Java Runtime Environment 1.4.2 or later
RJ-45 Ethernet port
RS-232 serial port (optional)
Java must be configured to disable caching of temporary files and applets to prevent
HP StorageWorks SN6000 Fibre Channel Switch QuickTools Switch Management User Guide
1
9