Figure 34
SNMP v3 User Editor dialog box
Table 15
describes the SNMP v3 User Editor dialog box parameters. After configuring the user, click OK to
save the settings and close the dialog box.
Table 15
SNMP v3 User Editor dialog box fields
Field
User Name
Group
Authentication Type
Authentication Phrase
Confirm Authentication
Phrase
Privacy Type
Privacy Phrase
Confirm Privacy Phrase
Testing a switch
The Switch Diagnostics dialog box
switches (online and offline). To open the Switch Diagnostic dialog box, open the Switch menu, select
Switch Diagnostics, and then select Online Switch Diagnostics or Offline Switch Diagnostics. For each type
of test, only one switch at a time can be tested. Offline Diagnostics can only be selected for the entry
switch.
The diagnostic tests are:
•
Online—A non-disruptive test that exercises port-to-device connections for all ports on a switch that are
currently online except for TR ports, which are not included in Online Switch Diagnostics.
Description
Name assigned to this SNMP v3 user.
Sets user's Read privileges: Read Only permits user to view
only SNMP v3 user settings, Read Write permits user to view
and change SNMP v3 user settings.
None, MD5, SHA. If None, no authentication phrase is
required. MD5 and SHA require an authentication phrase.
A unique string or phrase that functions as a password that
verifies the authenticity of the user.
Re-enter the Authentication Phrase to confirm it.
DES or None. If None, no privacy phrase is required.
A unique string or phrase that functions as a password that
verifies the privacy of the user.
Re-enter the Privacy Phrase to confirm it.
(Figure
HP StorageWorks SN6000 Fibre Channel Switch QuickTools Switch Management User Guide
35) enables you to test and verify the operational status of
75