Volume Setup - HP StorageWorks P9000 User Manual

Figure 5 Sample Database Validator system configuration

Volume setup

The following table shows the volume setup for the sample configuration shown in the previous
figure. All mapping operations must be done with Database Validator disabled.
NOTE:
This document does not describe P9500 device configuration. See the P9500 Configuration
Guide for the host platform (for example, Oracle Solaris Configuration Guide).
This document does not describe path allocation. See the HP StorageWorks P9000 Provisioning
for Open Systems User Guide.
This document does not describe VxVM volume configuration. See the VxVM user
documentation.
Table 2 Volume setup for sample configuration
P9500
CU:LDEV LUN
00:00 0
00:01 1
00:02 2
00:03 3
00:04 4
00:05 5
00:06 6
00:07 7
00:08 8
00:09 9
Type* Raw Device Name**
OPEN-V /dev/dsk/c4t0d0
OPEN-V /dev/dsk/c4t0d1
OPEN-V /dev/dsk/c4t0d2
OPEN-V /dev/dsk/c4t0d3
OPEN-V /dev/dsk/c4t0d4
OPEN-V /dev/dsk/c4t0d5
OPEN-V /dev/dsk/c4t0d6
OPEN-V /dev/dsk/c4t0d7
OPEN-V /dev/dsk/c4t0d8
OPEN-V /dev/dsk/c4t0d9
VxVM
Settings Volume Name
Concatenated /mnt/oralog1
Concatenated /mnt/oractl1
Concatenated /mnt/oradata1
and divided /mnt/oradata2
Divided /mnt/orastok1
/mnt/orastok2
None ---
Sample implementation of Database Validator
Purpose
Oracle redo log file
(block size=512B)
Oracle control file
(block size=8KB)
Oracle data files (block
size=8KB)
Oracle data files (block
size=2KB)
Command device
15