Displaying Database Validator Volumes; Displaying Database Validator Volumes Using Inqraid; Displaying Database Validator Volumes Using Raidvchkdsp - HP StorageWorks P9000 User Manual

Database validator user guide

Hide thumbs Also See for StorageWorks P9000:

Table of Contents

Example 3 Example of enabling Database Validator checking with LVM considerations

Displaying Database Validator volumes

The Database Validator volumes can be displayed using the following RAID Manager commands:

inqraid

raidvchkdsp

raidvchkscan

To verify the validation volumes, you can use the inqraid

(see the following example). Database Validator checking is enabled for the volumes with an

asterisk (*). For further information on the inqraid command, see the HP StorageWorks P9000

RAID Manager Reference Guide.

Example 4 Displaying Database Validator volumes for sample configuration

The raidvchkdsp command (see the following example) displays the relationship between the

Device_File and the paired volumes, based on the group (as defined in the local instance

configuration definition file). If Device_File column shows "Unknown" to HOST (instance), then the

Performing Database Validator operations

fp command with the CLI option

Table of Contents