HP P2000 Reference Manual page 128

Table 1 1 FA MIB 2.2 objects, descriptions, and values (continued)
Object
connUnitContact
connUnitLocation
connUnitEventFilter
connUnitNumEvents
connUnitMaxEvents
connUnitEventCurrID
connUnitRevsTable
connUnitRevsUnitId
connUnitRevsIndex
connUnitRevsRevId
connUnitRevsDescription
connUnitSensorTable
connUnitSensorUnitId
connUnitSensorIndex
connUnitSensorName
connUnitSensorStatus
connUnitSensorInfo
connUnitSensorMessage
connUnitSensorType
connUnitSensor
Characteristic
128 SNMP reference
Description
Settable: Contact information for this
connectivity unit
Settable: Location information for this
connectivity unit
Defines the event severity that will be
logged by this connectivity unit.
Settable only through SMU.
Number of events currently in the
connUnitEventTable
Maximum number of events that can
be defined in the
connUnitEventTable
Not supported
Includes the following objects as specified by the FA MIB2.2 Spec
connUnitId of the connectivity unit
that contains this revision table
Unique value for each
connUnitRevsEntry between 1
and connUnitNumRevs
Vendor-specific string identifying a
revision of a component of the
connUnit
Description of a component to which
the revision corresponds
Includes the following objects as specified by the FA MIB2.2 Spec
connUnitId of the connectivity unit
that contains this sensor table
Unique value for each
connUnitSensorEntry between
1 and connUnitNumSensors
Textual identification of the sensor
intended primarily for operator use
Status indicated by the sensor
Not supported
Description the sensor status as a
message
Type of component being monitored
by this sensor
Characteristics being monitored by
this sensor
Value
Default: Uninitialized Contact
Default: Uninitialized Location
Default: info(8)
Varies as the size of the Event Table
varies
400
0
Same as connUnitId
See External details for
connUnitRevsTable on page 131
String specifying the code version.
Reports "Not Installed or Offline" if
module information is not available.
See External details for
connUnitRevsTable on page 131
Same as connUnitId
See External details for
connUnitSensorTable on page 132
See External details for
connUnitSensorTable on page 132
ok(3), warning(4), or failed(5) as
appropriate for FRUs that are
present, or other(2) if FRU is not
present.
Empty string
connUnitSensorName followed
by the appropriate sensor reading.
Temperatures display in both Celsius
and Fahrenheit; for example, CPU
Temperature (Controller Module A):
48C 1 18F). Reports "Not installed"
or "Offline" if data is not available.
See External details for
connUnitSensorTable on page 132
See External details for
connUnitSensorTable on page 132