Drive Enclosure: I/O Module Properties; I/O Module: In Port Properties; I/O Module: Out Port Properties; Viewing Information About A Remote System - HP P2000 Reference Manual

Msa system
Hide thumbs Also See for P2000:
Table of Contents

Advertisement

Drive enclosure: I/O module properties

When you select an I/O module, a table shows:
Health.
OK. The I/O module is operating normally.
Degraded. The I/O module's operation is degraded.
Fault. The I/O module has failed.
N/A. Health is not available.
Health Reason.
Status.
Controller ID.

I/O module: In port properties

When you select an In port, a table shows:
Health.
OK. The port is operating normally.
Degraded. The port's operation is degraded.
Fault. The port has failed.
N/A. Health is not available.
Health Reason.
Status.
Name.

I/O module: Out port properties

When you select an Out port, a table shows:
Health.
OK. The port is operating normally.
Degraded. The port's operation is degraded.
Fault. The port has failed.
N/A. Health is not available.
Health Reason.
Status.
Name.

Viewing information about a remote system

In the Configuration View panel, right-click a remote system and select View > Overview. The System
Information table shows:
The username and network-port IP addresses that are configured on the local system to access the
remote system. The configured password is not shown.
Information such as the system name, location, and status that is read from the remote system.
To sign in to the remote system, click one of its IP address links.
HP P2000 G3 MSA System SMU Reference Guide 105

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P2000 g3

Table of Contents