Factory Default Setting - StarTech.com NETRS2321E Instruction Manual

8. The "Add Net" window will allow you to configure the COM port to
the settings used by the NETRS2321E unit you wish to associate
with. Select the proper operating mode, network settings used
to configure the NETRS2321E unit previously (see Web Console
Configuration).

Factory Default Setting

If you forget the setup password, or have incorrect settings making the
converter inoperable, reset the settings to factory default:
You can remove power from NETRS2321E and use any point tip to
push the Reset button (next to the RJ45 port) and hold it for 5 seconds.
This will automatically turn NETRS2321E back on, and reset the
password to default.
14