StarTech.com NETRS2321E Instruction Manual page 13

• Device ID: User assigned ID number for NETRS2321E. Available ID
range includes 0-65535
• Report device ID when connected: In TCP mode, if this parameter
• Setup password:Administration password used to login to the
• Access password: During socket connection, the Access/
detects a 10-character packet gap and no
more characters have arrived. The block
waiting time is extended, to avoid splitting
the complete packet.
is enabled, every time the socket is connected,
NETRS2321E will immediately report its
device ID in the following formats:
Serial #1 - nnnnnA[LF][CR]
Serial #2 - nnnnnB[LF][CR]
Digital I/O - nnnnnC[LF][CR]
The total length is 8 bytes, where "nnnnn" is a
5-digit device ID, assigned by the user; [LF] is
decimal 10; [CR] is decimal 13.
Controller Setup page. It may be left as empty, or
up to 15 characters long.
Authentication password may be empty or
up to entered as 15 characters long. If the
Access password is left empty, authentication
is disabled. Otherwise, the authentication will
proceed as normal. If authentication fails, or no
password is supplied within 10 seconds, the
socket will be closed.
10