Thecus N16000 Series User Manual page 66

iqn_Year
Iqn_Month
Authentication
Username
Password
Password Confirm
Mutual CHAP
Username
Password
Password Confirm
RAID ID
LUN Allocation
LUN Name
Unused
Allocation
LUN ID
iSCSI Block size
NOTE
NOTE
2. Enable the iSCSI Target Volume by selecting Enable.
3. Enter a Target Name. This will be used by the Stackable NAS function to
identify this export share.
4. Choose the current year from the Year dropdown.
5. Choose the current month from the Month dropdown.
6. Choose to enable CHAP authentication or choose None.
7. If you've enabled CHAP authentication, enter a username and a password.
Confirm your chosen password be reentering it in the Password Confirm
box.
8. Choose Thin-Provision or Instant Allocation
9. Enter a LUN Name.
10. Designate the percentage to be allocated from the Allocation drag bar.
11. When iSCSI target volume has been created, the LUN ID is configurable from
0 to 254 with a default of the next available number in ascending numerical
order. The LUN ID is unique and can not be duplicated.
12. Choose
[ 4K ] block size to have iSCSI target volume over 2TB barrier
Bytes ] block size in some application needed.
13. Click OK to create the iSCSI volume.
Select the current year from the dropdown.
Select the current month from the dropdown.
You may choose CHAP authentication or choose None.
Enter a username.
Enter a password.
Reenter the chosen password
With this level of security, the target and the initiator
authenticate each other.
Enter a username.
Enter a password.
Reenter the chosen password
ID of current RAID volume.
Two modes can be choose from:
Thin-provision：iSCSI thin-provisioning is sharing the
available physical capacity to multiple iSCSI target
volumes creation. And allowed virtual capacity be
assigned in prior then added physical space while it
has run out.
Instant Allocation : Allocate available physical
capacity to iSCSI target volumes.
Name of the LUN.
Unused space on current RAID volume.
Percentage and amount of space allocated to iSCSI volume.
Specific Logic unit ID number.
The iSCSI block size can be set under system advance
option, default is 512 Bytes.
[ 4K ] block size while more than 2TB capacity will be
configured in Windows XP.
[ 512 Bytes ] block size for application like VMware etc.
Be sure the iSCSI target volume has been enabled
or it will not list out while using Initiator to get
associated iSCSI target volumes.
The iSCSI target volume creation will associate at
least one LUN together. It can be assigned either
"Thin-Provisioning" or "Instant Allocation".
66
or
[ 512