IP
Port
Share Folder
Folder Permission
High-Availability
HA keeps your data active on two separate, N12000/N16000 Supports
Active/Passive — provides a fully redundant instance of each node, which is only
brought online when its associated primary node fails.
HA setup procedure:
HA needs two Thecus N12000 or N16000 to be setup one each for "Active" and
"Standby" unit and both units have to build up RAID volume in prior.
WARNING
Let's take example for two Thecus Units.
Host name:HA1 (172.16.66.30)
Host name:HA2 (172.16.66.33)
HA1 has RAID0 with capacity 13.0GB
HA2 has RAID0 with capacity 22.3GB
Checked WAN/LAN1 or LAN2 to enable port use
Specifies the port number of an incoming connection on a
non-standard port.
Select the file stored folder, it can not be empty.
Select the folder permission
Please be noticed if the system has been
used as standalone and contained more than
one RAID volume with data inside. Once it is
going to use for HA, all of data will be
destroyed and only master RAID will be used
for HA volume.
43