Setting Scanner Glass Size For Faxing; Color Fax Transmission; Canceling A Fax In Progress; How To Preview An Outgoing Fax - Brother MFC-J6510DW Basic User's Manual

Setting scanner glass size for
faxing
When documents are A4 size, you need to
set the Scan Size to A4. If you do not, the
bottom portion of the faxes will be missing.
a
Press (FAX).
b
Press a or b to choose
Glass ScanSize.
c
Press d or c to choose Letter, Legal,
Ledger, A4 or A3.
Press OK.
Note
• You can save the setting you use most
often by setting it as default. (See Setting
your changes as the new default in
chapter 3 of the Advanced User's Guide.)
• This setting is only available for sending
documents from the scanner glass.

Color fax transmission

Your machine can send a color fax to
machines that support this feature.
Color faxes cannot be stored in the machine's
memory. When you send a color fax, the
machine will send it in real time (even if
Real Time TX is set to Off).

Canceling a fax in progress

If you want to cancel a fax while the machine
is scanning, dialing or sending, press
Stop/Exit.
How to preview an outgoing
fax
4
You can preview a fax message before you
send it. You must set the Real Time
Transmission and Polling RX to Off before
you use this feature.
a
Press
b
Load the document.
c
Enter the fax number using the dial pad,
One Touch or Speed Dial.
d
Press Fax Preview.
The machine starts scanning the
document and the outgoing fax appears
on the LCD. When the fax is open the
control panel keys will perform the
operations shown below.
Key Description
Enlarge the fax.
Reduce the fax.
4
a or b Scroll vertically.
d or c Scroll horizontally.
Rotate the fax clockwise.
Go back to the previous page.
Go to the next page.
Note
If you preview a color fax before it is sent,
4
you will only be able to send it in black &
white. To send a color fax do not press the
Fax Preview key.
e
Press Black Start.
Note
The fax message in the memory will be
sent and then erased when you press
Black Start.
Sending a fax
(FAX).
4
4
35