Loading Documents; How To Load Documents; Using The Adf - Brother MFC-J6510DW Basic User's Manual

3

Loading documents

How to load
documents
You can send a fax, make copies, and scan
from the ADF (automatic document feeder)
and from the scanner glass.

Using the ADF

The ADF can hold up to 35 pages and feeds
each sheet individually. Use standard 20 lb
2
(80 g/m ) paper and always fan the pages
before putting them in the ADF.
Document Sizes Supported
Recommended Paper: 20 lb LTR (80 g/m
Length: 5.8 to 17 in.
(148 to 431.8 mm)
Width: 5.8 to 11.7 in.
(148 to 297 mm)
Weight:
17 to 24 lb
(64 to 90 g/m

How to load documents

IMPORTANT
• DO NOT pull on the document while it is
feeding.
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper
clipped, pasted or taped.
• DO NOT use cardboard, newspaper or
fabric.
Make sure documents with ink or correction
fluid are completely dry.
30
3
3
3
2
A4)
2
)
3
a
Unfold the ADF Document Support (1)
and the ADF Document Output Support
Flap (2).
1
b
Fan the pages well.
c
Adjust the paper guides (1) to fit the
width of your document.
1
d
Place your document, face up, top
edge first in the ADF until the LCD
screen shows ADF Ready and you feel
it touch the feed rollers.
IMPORTANT
DO NOT leave a thick document on the
scanner glass. If you do this, the ADF may
jam.
3
2