Chapter 8
Tray Select (MFC-J6710DW only)
You can change the tray temporarily for the
next copy. To change the default tray setting
see Tray use in Copy mode (MFC-J6710DW
only) on page 24.
a
Press
(COPY).
b
Load your document.
c
Enter the number of copies you want.
d
Press a or b to choose Tray Select.
e
Press d or c to choose Tray#1,
Tray#2 or Auto Select.
Press OK.
f
If you do not want to change additional
settings, press Black Start or
Color Start.
Note
Poster copy is not available when you use
Tray #2.
58
8