Brother MFC-J6510DW Basic User's Manual page 82

d
Turn the green release lever on the
orange protective packing (1) clockwise
until it clicks to release the vacuum seal.
Then remove the orange protective
packing as shown.
e
Each color has its own correct position.
Insert the ink cartridge in the direction of
the arrow on the label.
68
f
Gently push the back of the ink cartridge
marked "PUSH" until it clicks, and then
close the ink cartridge cover.
1
g
The machine will automatically reset the
ink dot counter.
Note
• If you replaced an ink cartridge, for
example Black, the LCD may ask you to
verify that it was a brand new one (for
1 example, Did You Change
For each new cartridge you installed,
press 1 (Yes) to automatically reset the
ink dot counter for that color. If the ink
cartridge you installed is not a brand new
one, be sure to press 2 (No).
• If the LCD shows No Ink Cartridge or
Cannot Detect after you install the ink
cartridges, check that the ink cartridges
are installed properly.
If ink gets in your eyes, wash it out with
water at once and call a doctor if you are
concerned.
CAUTION
Black).