Brother MFC-J220 Basic User's Manual page 48

Chapter 6
Changing the remote codes
If you want to use Remote Activation, you
have to turn on the remote codes. The preset
Remote Activation Code is l 5 1 (l 9 1 for
New Zealand). The preset Remote
Deactivation Code is # 5 1 (# 9 1 for New
Zealand). If you want to, you can replace
them with your own codes.
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Setup Receive.
Press OK.
d
Press a or b to choose Remote Codes.
Press OK.
e
Press a or b to choose On (or Off).
Press OK.
f
Enter the new Remote Activation Code.
(See Entering Text on page 96.)
g
Enter the new Remote Deactivation
Code.
(See Entering Text on page 96.)
h
Press Stop/Exit.
Note
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Remote Activation Code and
Remote Deactivation Code to another
three-digit code using the numbers 0-9, l,
#.
• Remote Codes might not work with some
telephone systems.
40
6