Volume Settings; Ring Volume; Beeper Volume - Brother MFC-J220 Basic User's Manual

Volume settings

Ring Volume

You can choose a range of ring volume
levels, from High to Off.
While the machine is idle, press
to adjust the volume level. The LCD shows
the current setting, and each key press will
change the volume to the next level. The
machine will keep the new setting until you
change it.
You can also change the volume through the
menu, by following the instructions below:
Setting the Ring Volume from the
menu
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
Press a or b to choose Ring.
Press OK.
e
Press a or b to choose Low, Med, High
or Off.
Press OK.
f
Press Stop/Exit.

Beeper Volume

1
When the beeper is on, the machine will beep
when you press a key, make a mistake, or
1
after you send or receive a fax.
You can choose a range of beeper volume
levels, from High to Off.
d or c
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
Press a or b to choose Beeper.
Press OK.
1
e
Press a or b to choose Low, Med, High
or Off.
Press OK.
f
Press Stop/Exit.
General information
1
7
1