Brother MFC-J220 Basic User's Manual page 77

c
Close the Jam Clear Cover.
Make sure the cover is closed correctly.
d
If the paper support flap is open, close it,
and then close the paper support. Pull
the paper tray completely out of the
machine.
e
Pull out the jammed paper (1).
1
f
Using both hands, grasp the plastic tabs
on both sides of the machine and lift the
scanner cover (1) until it locks securely
in the open position.
1
Move the print head (if necessary) to
take out any paper remaining in this
area. Make sure that jammed paper is
not left in the corners of the machine.
Check both ends of the print carriage.
Note
If the print head is at the right corner as
shown in the illustration, you cannot move
it. Re-connect the power cord, then hold
down Stop/Exit until the print head moves
to the middle. Unplug the machine from
the power source, and take out the paper.
IMPORTANT
If ink gets on your skin or clothing
immediately wash it off with soap or
detergent.
Troubleshooting
B
69