Card Remote Commander Rm-X151 - Sony CDX-M30 Operating Instructions Manual

PI
t
(+)1. (-) buttons
To control CD/PD*1, the same as
(ALBM)
+/- on the unit.
Setup, sound setting, etc., can be operated by
t •.
f)I
SeRl
(scroll) button
To scroll the display item.
~
Number buttons
To receive stored stations (press); store
stations (press and hold).
*
1 COX-M50IPIMR50IP only
*2 In the case of
a
COIMO changer, HO radio tuner or
SAT tuner being connected; when
(SOURCE)
is
pressed, the connected device ("MO:' "HO:' 'XM" or
"SR") will appear in the display, depending
on
which device is connected. Furthermore, if
( MODE)
is pressed, you can switch the changer,
HO radio tuner band or SAT tuner band.
(A HO radio tuner or SAT tuner can only be
connected to the COX-M50IPIM30.)
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE)
on the unit is pressed, or
a
disc is
inserted to activate the unit first.
About AUX cap
When not using the AUX input jack (rnJ), use the
supplied AUX cap to prevent water entering. Keep the
AUX cap out of the reach of children to prevent
accidental swallowing.
It---+---
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 6).
1m
~ (~)/
..
(~)
buttons
To control CD/radio/PD*1, the same as
(SEEK)
-/+ on the unit.
Setup, sound setting, etc., can be operated by
~
...
1m
DSPl
(display) button
To change display items.
PI
VOL (volume) +/- button
To adjust volume.
mATT (attenuate) button
To attenuate the sound. To cancel, press
again.
SEl
(select) button
The same as the select button on the unit.
Card remote commander
RM-X151
PI
t
(+)1. (-) buttons
To control CD/PD*1, the same as
(ALBM)
+/- on the unit.
Setup, sound setting, etc., can be operated by
t •.
f)I
SeRl
(scroll) button
To scroll the display item.
~
Number buttons
To receive stored stations (press); store
stations (press and hold).
*
1 COX-M50IPIMR50IP only
*2 In the case of
a
COIMO changer, HO radio tuner or
SAT tuner being connected; when
(SOURCE)
is
pressed, the connected device ("MO:' "HO:' 'XM" or
"SR") will appear in the display, depending
on
which device is connected. Furthermore, if
( MODE)
is pressed, you can switch the changer,
HO radio tuner band or SAT tuner band.
(A HO radio tuner or SAT tuner can only be
connected to the COX-M50IPIM30.)
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE)
on the unit is pressed, or
a
disc is
inserted to activate the unit first.
About AUX cap
When not using the AUX input jack (rnJ), use the
supplied AUX cap to prevent water entering. Keep the
AUX cap out of the reach of children to prevent
accidental swallowing.
It---+---
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 6).
1m
~ (~)/
..
(~)
buttons
To control CD/radio/PD*1, the same as
(SEEK)
-/+ on the unit.
Setup, sound setting, etc., can be operated by
~
...
1m
DSPl
(display) button
To change display items.
PI
VOL (volume) +/- button
To adjust volume.
mATT (attenuate) button
To attenuate the sound. To cancel, press
again.
SEl
(select) button
The same as the select button on the unit.
Card remote commander
RM-X151