Changing The Sound Settings; Adjusting The Sound Characteristics; Eq3; Adjusting Setup Items - Set - Sony DSX-MS60 Operating Instructions Manual

Changing the sound settings

The setting is complete and the display
returns to normal reception/play mode.
The following items can be set (follow the page
reference for details):
Selects an equalizer curve from 7 music types
(XPLOD, VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
(Dynamic Soundstage Organizer)
Creates a more ambient sound field.
To select the DSO mode: "1," "2," "3" or "OFF."
The larger the number, the more enhanced the
effect.
* * * (page 19)
Adjusts the sound balance between the left and
right speakers.
Adjusts the relative level between the front and
rear speakers.
* (Subwoofer volume)
Adjusts the subwoofer volume.
* (AUX level)
Adjusts the volume level for each connected
auxiliary equipment: "+18 dB" – "0 dB" – "–8
dB."
This setting negates the need to adjust the
volume level between sources.
*1 When EQ3 is activated.
*2 When the audio output is set to "SUB-OUT"
(page 20).
"ATT" is displayed at the lowest setting, and can be
adjusted up to 21 steps.
*3 When AUX source is activated (page 21).
"CUSTOM" of EQ3 allows you to make your
own equalizer settings.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
Repeat steps 3 and 4 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
The setting is complete and the display
returns to normal reception/play mode.
Tip
Other equalizer types are also adjustable.
Adjusting setup items — SET
The setup display appears.
The setup is complete and the display returns
to normal reception/play mode.
Note
Displayed items will differ, depending on the source
and setting.
The following items can be set (follow the page
reference for details):
t
19