Zappin; Storing And Receiving Stations; Storing Automatically - Btm; Storing Manually - Sony DSX-MS60 Operating Instructions Manual

While playing back short track passages in a
USB device in sequence, you can search for a
track you want to listen to.
ZAPPIN mode is suitable for searching for a
track in shuffle or shuffle repeat mode.
(ZAP/SHUF)
After "ZAPPIN" appears in the display,
playback starts from a passage of the next
track.
The passage is played for the set time, then a
click sounds and the next passage starts.
The track that you select returns to normal
play mode from the beginning.
To search a track by ZAPPIN mode again,
repeat steps 1 and 2.
Tips
You can select the playback time from about 6
seconds/15 seconds/30 seconds (page 20). You
cannot select the passage of the track to playback.
Press +>/–. in ZAPPIN mode to skip a track.
Pressing (BACK) also confirms a track to
playback.
12

Storing and receiving stations

When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
To change the band, press (MODE)
repeatedly. You can select from FM1, FM2,
FM3, AM1 or AM2.
The setup display appears.
The unit stores stations in order of frequency
in the preset list.
A beep sounds when the setting is stored.
The preset list appears.
(ZAP/SHUF)
Note
If you try to store another station on the same number
button, the previously stored station will be replaced.
(SOURCE/OFF)
>
(1) (6)