CONTENT IMPORTANT SAFETY INSTRUCTIONS FOR AUDIO PRODUCTS ........2 PRECAUTIONS ......................4 BEFORE USE ......................5 HOW TO REPLACE THE TURNTABLE STYLUS (NEEDLE) ..........5 PRODUCT OVERVIEW ....................6 PART I: PHONOGRAPH ....................7 PART II: AUDACITY SOFTWARE ..................8 AUDACITY INSTALLATION AND USB CONNECTION ............
Important Safety Instructions for Audio Products ‐ Read Throughly When using electrical products, basic precautions should always be followed including: 1. Read Instructions ‐ All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions ‐ The safety and operating instructions should be retained for future reference. 3. Heed Instructions ‐ All warnings on the product and in the operating instructions should be adhered to 4. Follow Instructions ‐ All operating and user instructions should be followed. 5. Cleaning ‐ Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 6. Attachments ‐ Do not use attachments not recommended by the product manufacturer as they ...
Page 4
from touching such power lines or circuits as contact with them might be fatal. 16. Overloading ‐ Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 17. Object and Liquid Entry ‐ Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short‐out parts that could result in a fire or electric shock. The apparatus should not be exposed to dripping or splashing, and on object filled with liquids such as a vase of flower, should be placed on the apparatus. ...
Precautions Safety Information‐caution: 1. In order to shut off the power of this product completely, unplug the power cord from the wall outlet. Be sure to unplug the unit if you do not intend to use it for an extended period of time, such as on a vacation. 2. Use of controls, adjustments and performance of procedures other than those specified herein may result in hazardous radiation exposure. 3. To prevent electric shock, match wide blade of plug to wide slot, fully insert. 4. If this product develops trouble, contact qualified service centers, and do not use the product in defective states. Safety Precautions WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION RISK OF ELECTRIC SHOCKS ‐ DO NOT OPEN! To reduce the risk of electric shock, do not remove cover or back. No user serviceable parts inside. Refer servicing to qualified service personnel. The light flash with arrowhead symbol, within an equilateral triangle, is intended to alert user to the presence of non‐insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute risk of electric shock to persons. ...
Before Use 1. Choose unit installation location carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, cold or moisture. Keep away from sources that hum, such as transformers or motors. 2. Do not open the cabinet as this might result in damage to the circuitry or electrical shock. If a foreign object should get into the set, contact your dealer. 3. When removing the power plug from the wall outlet, always pull directly on the plug, never pull the cord. 4. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry cloth. 5. Keep this manual in a safe place for future reference. How to Replace the Turntable Stylus (Needle) Removing old stylus 1. Set a screwdriver at the tip of the stylus and push down in the direction “A”. 2. Remove the stylus by pulling it forward and down. Installing a new stylus 1. Hold the tip of the stylus and insert the other edge ...
Product Overview 1. 45 RPM ADAPTOR 2. TONE ARM CONTROL INDICATOR 3. DECORATION (NOT FOR ADJUSTMENT TO TONE ARM) 4. TONE ARM 5. TONE ARM REST 6. SPEED CONTROL SWITCH 7. STYLUS 8. NEEDLE GUARD 9. TURNTABLE 10. ATMOSPHERE LIGHT 11. RCA LINE OUT CABLE 12. USB SLOT 13. AC POWER CORD 14. DUST COVER 6 ...
PART I: Phonograph 1. Remove all the packing from the unit. 2. Connect the RCA line out jacks to auxiliary input sockets of your home amplifier device. Make sure to match the socket colors with the jack colors. 3. Connect the AC power cord to the household outlet. Then the atmosphere light will light blue all the time. 4. Put a record onto the turntable. Remember to use the 45 RPM adaptor located on the right top corner when playing a 45 RPM record. 5. Select the speed according to the record you are playing. 6. Lift and move tone arm to turntable, TONE ARM CONTROL INDICATOR will light up. Place tone arm on the edge of the record and the record starts playing. NOTE: You’re strongly recommended to play records with closing transparent dust cover to prevent dusts. Also, please don’t place anything on top of dust cover especially playing a record. 7. To pause or stop playing, you need to lift and move the tone arm back to the tone arm rest manually. 8. When the record reaches to its end, tone arm and rotation stop. Lift the tone arm and place it to tone arm rest manually. 9. Remember to cover the white plastic needle guard to protect the stylus and unplug the unit. 7 ...
PART II: Audacity Software The provided CD disc contains the following software: (1)audacity‐src‐1.2.6‐‐‐‐‐‐‐‐‐ For source codes (2)Audacity_for_MAC‐‐‐‐‐‐‐‐‐For Macintosh (3)Audacity_for_WIN‐‐‐‐‐‐‐‐‐For Windows (4)AUTORUN.INF (5)The GNU General Public License.html The software is compatible with Window 98, 2000, ME, XP, VISTA, 7 and Macintosh. NOTE: The Audacity does not support the latest upgraded MAC OS9. Audacity Installation and USB Connection Connect one end of USB cable to the turntable and the other end into your computer. Then connect the AC power cord of turntable. Audacity for Windows 1. Please insert the Audacity software disk that comes with your unit. Go to My Computer and double click the CD ROM Drive. ...
Page 10
3. Double click the Audacity_for_WIN for Windows system, and double click the audacity‐win‐1.2.6 to install the audacity software. Installing the Audacity Software 1. The Audacity Setup Wizard will appear. Click on Next to install the software. 2. Click on “I accept the agreement” and click on Next. 9 ...
Page 11
3. Continue to click on the Next buttons. 10 ...
Page 12
4. Click on the Install button to start installation. 5. Click on Finish to complete installation. 6. You can now open the Audacity software and start recording your files. NOTE: Once you set up Audacity, you do not need to re‐set it with each use. (For additional information, visit the Audacity website at http://audacity.sourceforge.net) 11 ...
Configuring Audacity for Microsoft Windows Audacity Interface Audacity Control Buttons the attribute controls button at the top of the screen to go to beginning, Play, Record, Pause, Stop and End. Use the File, Edit, View, Project, Generate, Effect and Analyze menus to Save, Export, and edit the music. 1. Click the ( ) button to skip to start; 2. Adjust the output volume; 3. Click the ( ) button to play; 4. Click the ( ) button to record; 5. Click the ( ) button to pause the recording; 6. Click the ( ...
Page 14
Audacity Preferences 1. Click the “Edit” on the Audacity interface, select “Preferences”. The screen will open up Audacity Preferences. You can see the Audio I/O, Quality, File Formats, Spectrograms, Directories, Interface, Keyboard and Mouse in the Audacity preference interface. 13 ...
Page 15
2. Select the recording device: microphone (USB Audio controller) Click the “Audio I/O” at the Audacity Preferences interface. Recording Click the “Device” and select “microphone (USB Audio controller)”. Click the “Channels” and select 2 (stereo). Tick the checkboxes below “Channels”. Click the “OK”. Note: If you couldn't find the "microphone (USB Audio controller)" from the Device list, close the Audacity Software and re‐open then try again. 3. Adjust the output and input volume. NOTE: Because of the variation of different operation systems, the input volume control may not work on some individual Windows versions. Windows Vista is recommended to ensure the input volume control working properly. For more information on setup, please see ‘Setting up Audacity’ on the website below: http://wiki.audacityteam.org/index.php?title=Transferring_tapes_and_records_to_computer_or_ CD And for any query on ‘Mixer Toolbar’ please see http://wiki.audacityteam.org/index.php?title=Mixer_Toolbar_Issues 14 ...
Recording Operation To download music and save into computer: 1. Place the record on the turntable. 2. Move the tone arm over to the record to start playing. 3. Click the Record ( ) button to start recording. The waves (left and right tracks) will show on the interface. 4. At the end of song, click “Pause” ( ) on audacity, then lift and move the tone arm to the tone arm rest. For the next song, replace the album or move tone arm to another desired song. Immediately press “Pause” ( ) on audacity and downloading will continue. PLEASE NOTE: Do not click “Stop” on audacity while continuously downloading songs. Remember to click “Pause” in between your desired songs. Press “Stop” on audacity only when all your desired songs have been downloaded. ...
General Problems for All Windows Versions 1. If you do not have the fluctuant wave on the interface when recording, adjust the recording volume as follows: • Click the START in the left corner of the computer, select Programs, Accessories, Entertainment, Sound Recorder to enter Sound Recorder interface. • In SOUND RECORDER interface Select Edit and click Audio Properties in the bottom of the menu to enter Audio Properties interface. ...
Page 18
• In WAVE IN interface Adjust the recording volume from the middle or higher. The fluctuant wave will show on the interface when recording. 2. When the turntable is connected, you may not hear any sound if you need to listen to video or music. It is because the default playback device has been changed to USB Audio controller once the turntable connects to the PC. ...
Page 19
Properties”. Or, find and click into Control Panel. Find and select “Sound and audio device” and choose “Audio” tab. In Sound playback, change the default device by down pulling arrow. Select your playback device and click OK. Then sound comes out. For more information on Windows system sound requires reset, please go to http://wiki.audacityteam.org/index.php?title=USB_turntables#Set_up_Audacity_to_record_from _the_turntable 3. If you want to hear the music while downloading to the computer, follow steps below: Go to the Audacity interface. Click Edit and select “Preference”. Then click “Audio I/O” tab. And follow the following setting. Click “OK” to confirm. Deselect the check box to disable its function. ...
Adjustment for Windows 7 and Some Vista Systems Only If do not have the fluctuant wave on the Audacity interface or the sound is low or distorted when recording, adjust the recording level as follows: Click “Start” at the lower left corner, go to the Control Panel. In Classic View, double click the Sound icon. 19 ...
Page 21
Or in Control Panel Home view, click “Hardware and Sound”. Then click “sound”. 20 ...
Page 22
In the Sound interface, select “Recording” tab. Then, choose a recording device. It is recommended to select Microphone of USB Audio controller which is highlighted in the picture, and click “Properties”. 21 ...
Page 23
Select “Levels” and adjust the Volume Reading. The reading is from 0 to 100. Normally it should be 2‐6. However, you may refer to the Input Level Indicator from the Audacity panel exceed that doesn’t 0. Then click “OK” on the Microphone properties interface and sound interface. Close the Control Panel. (Please note that there is no “Levels” tab in “Sound” panel in some operating system, such as Windows 98, Windows 2000. For Windows 7 users and Vista users, the “Levels” tab in “Sound” panel is available.) Input Level Indicator ...
You have a music download on your computer now. But the music needs to be saved and converted to WAV, Ogg, or MP3 formats before exporting. You may play back the song through your computer. Simply click the ( ) to play and turn on your computer speaker. NOTE: You may visit the Audacity website at http://audacity.source forge.net. For more detailed information and operation, etc. Preparing to Export and Save For MP3 Format Prepare for MP3 Export‐‐‐ (Additional software “lame_enc.dll” needs to be installed.) 1. Please make sure that the Audacity disc is still inserted in your computer. 2. Click the “Edit” Tab on the Audacity interface, select “Preferences”. 3. Select the File Formats Tab and click on the Find Library Button. 23 ...
Page 25
4. A dialog box will appear. Click “Yes”. 5. Another box appears to locate the “CD ROM”. You will find the “lame_enc.dll” software. Click the software then click Open. 6. Click on the OK Button. Now the MP3 software set up is complete and you may proceed with the exporting to MP3 format. 24 ...
Dividing Tracks 1. Press ( ) button to return to the beginning of the first song. 2. Move cursor to the wave graphic area, left click mouse and hold then drag from left to right. Release the mouse when the highlighted area reaches the end of the first song. Highlighted 3. Click "file" tab then select "EXPORT SELECTION AS MP3". 4. The window will pop up a dialog box for you to put the song title (“File name”), where you want to save it (“Save in”), and file format (“Save as type”). 5. Click “Save” and the first song is saved on the computer. See interface example below, saved as MP3 format: ...
Complete box below: Second song to be divided and saved: 1. Move cursor to the wave graphic beginning of 2nd song. Left click mouse, hold and drag from left to right until you reach end of 2nd song. 2. Click "file" tab then select "EXPORT SELECTION as MP3". 3. Follow steps above to divide songs, one‐by‐one. To Title Additional Songs (for MP3 Format Only) During “Export Selection as MP3”, the software only provides one time to title song being saved. All subsequent songs being divided from the same track are with the same title. To change the titles, follow steps below: 1. Right click on the Music file which will show all its contents. 2 .Select Properties, then click on Summary. 3. Click on Title, and then change it to your desired title. 4. Select OK. 5. Do all these steps until you title each song. 26 ...
Export and Save for WAV and Ogg Formats (After Recording is Complete) When the song is finished, click Stop ( ) on audacity. Then lift and move the tone arm to the tone arm rest. 1. Highlighted the song which you want to save, then click the file tab on the audacity interface. 2. Select “Export Selection as WAV” or “Export Selection as Ogg”. To Export Selection AS WAV………… To Export Selection As Ogg 27 ...
Page 29
3. Once you have chosen to which file format recording should be exported, the interface below appears. Here you may provide the file name and the location where it will be saved, e.g. on the desktop. Then click “Save”. Save as WAV Save as Ogg Note: You have an option to save one time for all the songs into one file, after complete the download, click the file tab, and select the Export as MP3, Export as WAV or Export as OGG. 28 ...
Setting the language 1. Double click the Audacity icon to open the software. Then a window will open as per illustration A below. (Illustration A) 2. Click Edit and select Preferences. (Illustration B) 3. Another window titled with Audacity Preferences will appear. Click the Interface tab and click the pull down arrow ( ) to select Francais.
Page 32
4. Then click OK to close the window. The new setting will only be active in the next start - that means you need to close the Audacity and re-open the software again. Then the Audacity will be seen in French. (Illustration E)
Audacity for MAC 1. Please insert the Audacity software disk that comes with your unit. Click the Audacity disk on the desktop. 2. There are five folders in the Audacity disk. Select Audacity_for_MAC for Macintosh system, and select Audacity_for_WIN for Windows system. If your computer is Mac OS X system (Intel CPU), please enter the Intel folder to install the audacity software;...
Configuring Audacity for Mac Audacity Interface for Mac Audacity Interface‐‐‐Settings and controls. At the top of the main Audacity window, to the right of the play control buttons, you will see the input and output level meters (labeled L and R). Under the output level meter, is an icon that looks like a microphone. Next to the microphone is a black arrow that points down. Click this arrow ...
Page 35
Audacity Preferences 1. Click the “Audacity” on the Audacity interface, select “Preferences”. The screen will open up Audacity Preferences. You can see the Audio I/O, Quality, Import/Export, Interface, Spectrograms, Directories, Smart Recording, Theme, Keyboard and Mouse. 34 ...
Page 36
2. Select the recording device: Core Audio (USB Audio controller) Click the “Audio I/O” at the Audacity Preferences interface. Click the Recording “Device” and select “Core Audio (USB Audio controller)”. Click the “Channels” and select 2 (stereo). Click the “OK”. Note: If you couldn't find the "Core Audio (USB Audio controller)" from the Device list, close the Audacity Software and re‐open then try again or insure the turntable is connected to the computer. 3. Under the Quality tab, set the Default Sample Format to 16 bit. Select OK to save your setting and close the preferences window. 35 ...
Page 37
To set the Smart Recording 1. To select the Smart Recording in the Audacity Preferences interface, and set the Sound Activation Level (dB) to ‐36, and then click OK. 2. On the top of the main Audacity window, to the right of the input and output level meters (labeled L and R), you will see the input and output volume. The left of the input and output volume, there is a volume icon. Adjust the output and input volume to maximum. ...
Recording Operation To download music into computer: 1. Place the record on the turntable. 2. Move the tone arm over to the record to start playing. 3. Click the Record ( ) button to start recording. The waves (top and bottom) will show on the interface. 4. At end of song, click “Pause” ( ) on audacity, lift and move the tone arm to the tone arm rest. For the next song, replace the album or move tone arm to another desired song. Immediately press “Pause” ( ) on audacity and downloading will continue. PLEASE NOTE: Do not click “Stop” on audacity while continuously downloading songs. Remember to click “Pause” between your desired songs. Press “Stop” on audacity only when ...
Dividing Tracks When your downloading is complete: 1. Press ( ) button to return to the beginning of the first song. 2. Move cursor to the wave graphic area, left click mouse, hold and drag from left to right. Release the mouse when your desired section in the time bar is highlighted. 3. Click “file” tab then select “EXPORT SELECTION”. 4. The window will pop up a dialog box for you to complete the Metadata. Click OK button after you type in. 5. Then a window appears. Select your music file location and format, and type in your file name. Click “Save” and the song is saved on the computer. 38 ...
Export and Save Files (After Recording is Complete) When the song is finished, click Stop ( ) on audacity. Then lift and move the tone arm to the tone arm rest. You have a music download on your computer now. You may play back the song through your computer. Simply click the ( ) to play. NOTE: You may visit the Audacity website at http://audacity.source forge.net. For more detailed information and operation, etc. 1. Click the file tab on the audacity interface. Select “Export” to save the file. 2. It will pop up below window after click Export. It will default MP3 format, but you also can select other format, only need to click the arrow located at the right of the MP3 Files. ...
Audacity 1.3 Beta Version In case that you find the Audacity program provided in the CD does not work properly on your computer, especially if the operating system is Windows Vista, Windows 7 and Mac OSX, you may try this beta version. The Audacity provides a new yet not quite finished development 1.3 Beta version which will be the basis of the next stable version. Try the Beta version and send your comments to Audacity team if any problems or any features that need improvement or no longer work properly with full details (including your operating system) mentioned. Preliminary • You can install 1.3 Beta and 1.2 on the same machine by installing them to different directories. ...
Page 42
2. Installation Wizard a) Click the dropdown arrow to select a setup language then click on OK. b) Audacity 1.3 Beta setup wizard appears on the screen. Click on Next button. c) Continue to click on Next. 41 ...
Page 43
d) Normally most people will install programs in C disk, click on Next. If you want to change the directory, click Browse, select a setup directory and click on Next. e) Continue to click on Next. 42 ...
Page 45
f) Click on Finish to complete the installation. NOTE: You do not need to install the program in every use. g) Then the program will be opened if the checkbox beside the “Launch Audacity” is selected. Here is the interface of Audacity program. 44 ...
Page 46
3. A few settings will be required before you download the music. a) Click ‘Edit’ and select ‘Preferences’. b) In the pop‐out window of the Audacity Preferences, you will see tabs of Devices, Playback, Recording, Quality, Interface, Tracks, Import/Export, Extended Import, Projects, Libraries, Spectrograms, Directories, Warnings, Effects, Keyboard and Mouse are listed on the left side of the window. 45 ...
Page 47
c) Click ‘Device’ on the left side, then the detail contents of the Devices will show on the right hand side of Interface. Click the arrow on ‘Device’ below ‘Recording’ and choose ‘USB Audio Controller’. Click the arrow on ‘Channels’ to select ‘2(Stereo)’. d) Click ‘Recording’ on the left side, you will see the detail contents on the right side. Click the checkbox beside ‘Software Playthrough: Listen while recording or monitoring new track’. ...
Page 48
e) Before export an MP3 file, you need to find ‘lame’ first. If the program does not show the MP3 Library, make sure the driver disc is inside your computer. If the ‘lame_enc.dll’ software is not working on your computer (i.e., Vista and 7), you must download the ‘lame’ software from website.
Page 49
Or if you cannot find it or the lame file you found is not compatible a window appears to prompt you to download the latest version. Click OK to close the pop‐up window. Click ‘Locate..’ then in the Locate Lame window click ‘Download’ button and a website will be opened automatically. Opened website to download ‘lame_enc.dll’: 48 ...
Page 50
Below the chapter Windows, click ‘LAME download page’ in the first point. Then another page will be browsed as per below. Refresh the webpage if you cannot see the contents except the ATTENTION sentence.. Then scroll down the webpage and you will see a form. The Audacity LAME is free, so you can click ‘libmp3lam‐win‐3.98.2.zip’ under ZIP OPTION to download. Then unzip the file. ...
Page 51
Go back to the Audacity and click ‘Browse’ and find the downloaded LAME. Then click ‘ok’ button. f) Click ‘OK’ button to complete your setting and close ‘Audacity Preferences’ interface. g) For detailed information about how to run this program, please click ‘Help’ and click ‘Manual (in web browser)’. 50 ...
Recording Operations Button Controls From left to right these button controls are: •Record Skip to Start Play Pause Stop Skip to End Output and input monitors •Output level meter •Input level meter • Output volume and output level slider • Input volume and input level slider 1. Press the “Record” button on the Audacity and set the aux source (PHONO) to play. NOTE: During recording make sure the input level indicator does not exceed “0”. If you find the recording distorted (for example, the input level indicator exceeds “0” during recording, or the waveform is clipped, or the playback quality of the recording is distorted) you can adjust the sound ...
Page 53
2. Press “pause” in between each song. Only press the “stop” button when all desired songs have been recorded. TIPS: If you press the “stop” button by accident, you can click “Transport” and click “Append Record”. Then you can continue to record in the same track. For example, the “stop” button has been pressed by accident at the end of the 1st song. Do not click anything in Audacity and get another song prepared, then click “Transport” tab and select “Append Record” (refer the picture above). Soon the 2nd song will continue to record on the same track at the end of the 1st song. ...
Page 54
5. Click “File” and select “export section…” to export the song. 6. Another window appears. Select a location as well as the format (most people prefer to save audios as MP3 format (MP3 format is most common) in My Music) and fill in the file name, then click “Save”. You can also choose alternative format such as AIFF, WAV, OGG or FLAC if these formats are supported ...
Page 55
7. Then another window will show up. Fill in the information in the window titled with “Edit Metadata”. Then click “OK”. Wait a few seconds before exporting the selected audio. Now you can copy the audio files to your MP3 player. 8. If you need advanced operations please click “HELP” and select “QUICK HELP (IN WEB BROWSER)” or “MANUAL (IN WEB BROWSER)”. 54 ...
For Mac OS X Go to the Audacity official website http://audacity.sourceforge.net/download/beta_mac and download the program. 1. Double click on the Audacity 1.3.13 hardware you just downloaded then a window will be opened. Select all the files in the folder and drag them into a suitable location on the hard drive ...
Page 57
b) In the window of Audacity Preferences click “Devices” on the left hand side. Then on the right side within the Recording Device column, set Device to “USB Audio Controller”, Channels to “2 (Stereo)”. c) Click “Recording” on the left. Then on the right side in Playthrough column, click the checkbox beside the “Software PLaythrough: Listen while recording or monitoring new track”. In the Sound Activated Recording column, slide the meter to ‐36 db. 56 ...
Page 58
d) Click “Quality” on the left then on the right side in Sampling column, select “44100 Hz” in Default Sample Rate and select “16‐bit” in Default Sample Format. e) Click “Libraries” on the left then on the right side in MP3 Export Library column, check if the program has detected and shown the MP3 Library Version there. If shown, skip and forward to step (f). If it display “MP3 export library not found” you need to find the “LAME”. Click “Locate…” button then a ...
Page 59
Or if you cannot find it or the LAME file you found is not compatible, click the “Download” button and a website will show automatically. Scroll down the webpage to find a title named “MAC OS X”. Click the “LAME download page” and another website will show automatically. 58 ...
Page 60
Scroll down the webpage. You will notice a form provided the LAME for all version systems. Find a title named “For Audacity 1.3.3 or later on Mac OS X (Intel or PPC)” and then click “Lame Library v3.98.2 for Audacity on OSX.dmg” to download the file. Then locate the LAME and click OK. ...
Recording Operations Basic control buttons 1. Skip to start 4. Pause 7. Output level slider 2. Play 5. Stop 8. Input level slider 3. •Record 6. Skip to end 1. Press the “Record” button on the Audacity and set the aux source (PHONO) to play. NOTE: During recording, make sure that the input level indicator does not exceed “0”. If you find the recording is distorted (for example, the input level indicator exceeds “0”, or the waveform is clipped, or the recording sound is distorted.) you can adjust the sound level of the original music. 2. Press “pause” in between each song. Only press the “stop” button when all desired songs have been recorded. TIPS: If you press the “stop” button by accident, you can click “Transport” and click “Append Record”. Then you can continue to record in the same track. ...
Page 62
3. Before exporting press “skip to start” button and then press “play” button to play the recording. 4. Then select a section you want to export by moving the cursor to the beginning then holding and dragging it. Release the cursor and your selected section is highlighted. 5. Click “File” and select “export section…” to export the song. 6. Another window appears. Select the save‐as location as well as the format and fill in the save‐as name, then click “Save”. ...
Page 63
7. In the coming up window named Edit Metadata, fill in the information then click “OK”. Wait a few seconds to export the selected audio. Once it is completed, you can copy the audio to your portable MP3 player. 8. If you have any doubts or need some advanced instructions please click “HELP” and select “QUICK HELP (IN WEB BROWSER)” or “MANUAL (IN WEB BROWSER)”. 62 ...
Troubleshooting Guide In case of trouble with the unit, please look through problems below and see if you can solve them yourself before calling your dealer. NO SOUND: • If you are not getting any sound into the software application, go back to the preferences as shown above and make sure you have selected the USB input for the recording device. ...
• Make sure that your RCA plugs are plugged into a source or not touching bare metal. If you are experiencing noise through the USB, you may have interference from the RCA plugs. Ensure the USB cable is not touching or near any other cables. • If you experience any odd sounds coming from the recording, try closing all applications, restarting the computer, and only run Audacity while recording. • Unplug the USB cable and close the software. Then, re‐plug the USB cable and open the software and try. ...
Page 66
FCC Statement Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the ...
Page 67
Innovative Technology Electronics Corp. Limited Warranty: 90 Days Labor, One Year Parts Innovative Technology Electronics Corp. (IT) warrants the product to be free from “Defects” in materials under normal use for a period of “One Year” from the date of the original purchase. The Warranty is “Not” transferable. IT agrees, within the initial “90 Day” period, to repair or replace the product if it is determined to be defective at “No Charge”. It is further agreed that IT will cover the cost to repair or replace damaged “Parts” only for a total period of “One Year” from the date of the original purchase. The warranty does not cover cosmetic damage, antennas, AC cords, cabinets, headbands, ear‐pads, or damage due to line power surges, connection to improper voltage supply or settings, misuse, mishandling, accident, acts of God or attempted repair by an unauthorized service agent. To obtain service, the purchaser MUST present an original sales receipt / proof of purchase. Please contact us at www.ithomeproducts.com to request an RMA (Return Material Authorization) number to return products for service or replacement. Returns without an RMA number on the package will be refused and returned to sender. Upon receipt of the returning item and our full inspection (IT) may issue a replacement to customer for the same item or of one that has equivalent value and features. To return an item, supply full name, return address, phone number, item purchased, receipt of purchase and reason for return to obtain RMA number. All returns must be in the original packaging or reasonable substitute to prevent damage. Customer “Must” include full name, shipping address and telephone number inside of package. No return will be shipped back to a PO Box or APO address. Please include your check or money order in the amount of • USD$5.00 for items $10.00 to $39.99 (Price Paid Per Unit) • USD$10.00 for items $40.00 to $99.99. (Price Paid Per Unit) • USD$16.00, for items $100.00 and up. (Price Paid Per Unit) • Shipping fees are non‐refundable to be payable to Innovative Technology Electronics Corp.(for handling and return shipping charges) (IT) will not be responsible for delays or unprocessed claims resulting from a purchaser’s failure to provide any / all of the necessary information. Send all inquiries or RMA request via our website www.ithomeproducts.com/support. Innovative Technology Electronics Corp. ...
Page 68
REMEDY OF THE CUSTOMER, (IT) SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. 67 ...