Advertisement
Quick Links
RE: The operation guide to open and close the CD tray forcedly
Repairing the CD tray according to the following operation if CD tray can't open or CD disc can't be picked out.
(Attention : To remove the power plug before the operation).
1、 Observe the two bottom sides of the CD tray
(refer to below image)
the aperture
the aperture(will be operated)
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Innovative Technology ITRR-501
Summary of Contents for Innovative Technology ITRR-501
- Page 1 RE: The operation guide to open and close the CD tray forcedly Repairing the CD tray according to the following operation if CD tray can’t open or CD disc can’t be picked out. (Attention : To remove the power plug before the operation). 1、...
- Page 2 2. If the aperture is the left bottom side, you can insert a flat and thin metal into the aperture, the location is around 4cm away from left the panel. About 4CM 2. If the aperture is on the right bottom side, you can insert a flat and thin metal into the aperture, the location is around 4cm away from the right panel.
- Page 3 5、 The CD tray will bounce out.
- Page 4 6、 Let down the metal, then pull the CD tray out with two fingers steadily (pick out the CD). 7、 Push the CD tray with your hand. The CD tray will closed and a clicking sound will be heard. ************************THE END************************...
Need help?
Do you have a question about the ITRR-501 and is the answer not in the manual?
Questions and answers
cd tray will not go in
If the CD tray on the Innovative Technology ITRR-501 won't go in, ensure that you are pushing it in manually until you hear a clicking sound. If it still does not close, check for obstructions or misalignment. Also, make sure the power is connected properly, as a power issue could prevent the tray from functioning correctly.
This answer is automatically generated