4. Replace the computer cover. For more information, see "Replacing the cover
5. Thread the cable through the U-bolt and around an object that is not a part of
Replacing the cover and connecting the cables
After working with options, you need to install any removed parts, replace the
cover, and reconnect any cables, including power cords and telephone lines. Also,
depending on the option installed, you might need to confirm the updated
information in the Configuration/Setup Utility program.
To replace the cover and connect cables to your computer:
1. Ensure that all components have been reassembled correctly and that no tools
2. Clear any cables that might impede the replacement of the cover.
32
User Guide
and connecting the cables".
or permanently secured to the building structure or foundation, and from
which it cannot be removed; then fasten the cable ends together with a lock.
1 U-bolt
2 Bolt holes
3 Nuts
What to do next:
v To work with another option, go to the appropriate section.
or loose screws are left inside your computer.