Lenovo NetVista A40p User Manual page 78

3. Position the cover over the chassis so that the front edge is approximately one
4. Lower the cover down over the chassis so that the rail guides engage the rails.
5. Slide the cover forward. You might need to lift the front of the cover slightly to
6. Insert the three thumbscrews into the holes in the cover and the chassis and
7. Reconnect the external cables and cords to the computer. See "Chapter 2.
8. To update the configuration, see "Chapter 6. Updating the computer
66
User Guide
inch away from the front bezel.
align it properly.
tighten.
Installing external options" on page 11.
configuration" on page 67.
Important:
When the power cord is first plugged in, the computer might appear to
power on for a few seconds, then power off. This is a normal sequence to
enable the computer to self-initialize.