Lenovo NetVista A40p User Manual page 52

To install a RIMM or C-RIMM:
1. Touch the static-protective package containing the RIMM to any unpainted
2. If the retaining clips are not already open, open them.
3. Position the RIMM or C-RIMM above the connector so that the two notches on
4. Firmly push the module straight down into the connector until the retaining
40
User Guide
metal surface in the computer, and then remove the RIMM or C-RIMM.
the bottom edge of the module align properly with the empty connector.
clips pop up and fit snugly around both ends of the module.
What to do next:
v Replace the AGP adapter and adapter slot cover latch.
v To work with another option, go to the appropriate section.
v To complete the installation, go to "Replacing the cover and connecting the
cables" on page 51.
Notches