HP Z600 - Workstation - 6 GB RAM User Manual page 54

2. Push gently outward on the DIMM socket levers as shown in the following illustration. (The example
shows a HP Z600 Workstation.)
Figure 7-1
3. Align the DIMM connector key with the DIMM socket key, and then seat the DIMM firmly in the
socket (1) as shown in the following illustration.
CAUTION:
damage, align these guides properly when installing DIMMs.
Figure 7-2
4. Secure the socket levers (2).
5. Replace all components that were removed in preparation for component installation.
46 Chapter 7 Installing memory
Opening DIMM socket levers
DIMMs and their sockets are keyed for proper installation. To prevent socket or DIMM
Seating the DIMM
ENWW