2.
Ensuring that the rail-bracket shelf (2) is engaged by the lip on the underside of the tray (3), slide
the assembly into position in the rack.
Figure 5
3.
Secure the assembly into the rack by tightening the silver captive screws (1).
Figure 6
NOTE:
the handle to slide the assembly out of the rack until the latches in the tray (2) engage the stop
feature. Reach under the assembly and release the latches (2) to disengage the tray from the rails.
CAUTION:
6
Rack mount tray installation
Loading the workstation into the rack
Completing installation
To remove the assembly from the rack, loosen the silver captive screws (1), and then pull
For removal, the workstation must be supported once the latches are disengaged.
ENWW
Need help?
Do you have a question about the Z210 Series and is the answer not in the manual?
Questions and answers