4.
Install cage nuts into the rear locations of the rack that best align with the bottom two holes at the
rear of the depth-adjustable fixed rail, ensuring they are installed level with the front.
5.
Insert two screws through each depth-adjustable fixed rail and into the cage nuts installed earlier,
securing the rail to the rear of the rack.
6.
Retighten the wing nuts on the depth-adjustable fixed rails.
The rails are now ready for component installation. Refer to the documentation included with the
component for complete installation instructions.
NOTE:
After installing the component, insert additional screws into the front depth-adjustable fixed
rails for component support.
10
Appendix A HP Depth-Adjustable Fixed Rails Rack Option Kit installation instructions
ENWW
Need help?
Do you have a question about the Z210 Series and is the answer not in the manual?
Questions and answers