HP Z200 - Small Form Factor Workstation Setup And Configuration Manual page 9

Hp z200 workstation - amt setup and configuration for the z200 workstation with intel amt technology

Hide thumbs Also See for Z200 - Small Form Factor Workstation:

Table of Contents

TCP/IP Settings.

AMT 6.0 supports IPV4 and IPV6 interface. Follow steps 8a-8f to configure for

IPV4 and 8g-8h for IPV6.

Figure 4: Intel ME TCP/IP Settings Screen

Wired LAN IPV4 Configuration

DHCP Mode

Default Setting

Recommended Setting

DHCP can be used if it is available (TCP/IP settings will be configured by a

DHCP server). If DHCP is disabled, then steps 8b through 8f are required to

configure the IPv4 static IP address for Intel AMT.

: Enabled

Table of Contents

Show Quick Links

Table of Contents