HP Z200 - Small Form Factor Workstation Setup And Configuration Manual page 10

Figure 5: Intel ME Wired LAN IPv4 Configuration Screen
b. IPV4 Address
Enter a static address
Default Setting
Recommended Setting
Example: 192.168.0.1
Make sure all AMT systems have a unique static IP address. Multiple systems
sharing the same IP address can lead to network collisions, which will cause
the systems to not respond correctly.
c. Subnet Mask
Enter subnet mask
Default Setting
Recommended Setting
Example: 255.255.255.0
d. Default Gateway Address
Leave as default value and hit Enter
Default Setting
Recommended Setting
Leave as 0.0.0.0 if this option is not needed.
e. Preferred DNS Address
Leave as default value and hit Enter
Default Setting
Recommended Setting
Leave as 0.0.0.0 if this option is not needed.
: 0.0.0.0
: Network Dependent
: 255.255.255.0
: Network Dependent
: 0.0.0.0
: Network Dependent
: 0.0.0.0
: Network Dependent
10