HP Z200 - Small Form Factor Workstation Setup And Configuration Manual page 28

10) Go into Network Setup & select Host Name.
Enter a host name
Default Setting
Recommended Setting
Spaces are not accepted in the host name.
11) Go into Network Setup and select TCP/IP.
a. Wired LAN IPv4 Configuration
DHCP Mode
Default Setting
Recommended Setting
Select Enabled.
For the purpose of this whitepaper, DHCP is enabled.
b. Wired LAN IPV6 Configuration
Select Enabled option for IPv6 Feature Selection
IPv6 Interface ID Type
Default Setting
Recommended Setting
RANDOM ID - The IPv6 Interface ID is automatically generated using a
random number as described in RFC 3041. This is the default.
Intel ID - The IPv6 Interface ID is automatically generated using the MAC
address.
Manual ID - The IPv6 Interface ID is configured manually. Selecting this
type requires that the Manual Interface ID is set with a valid value.
IPv6 Address
Enter a static IPv6 address
Default Setting
Recommended Setting
Example: 2001:db8::1428:57ab
IPv6 default Router
Enter the IPv6 Default Router address
Default Setting
Recommended Setting
Example: 2001:db8::1428:57ab
Preferred DNS IPv6 Address
Enter the Preferred DNS IPv6 Address
Default Setting
Recommended Setting
Example: 2001:db8::1428:57ab
: None
: User Dependent
: DHCP Enabled
: User Dependent
: Random ID
: Random ID
: None
: Network Dependent
: None
: Network Dependent
: None
: Network Dependent
28