Deploying The First Server Blade; Reconfiguring The Server Blade; Vulnerability Scanning And Deploying Patches And Fixes; Hp Vulnerability And Patch Management Pack (Vpm) Overview - HP Xw460c - ProLiant - Blade Workstation User Manual

Deploying the first server blade

1. In the Jobs pane, in the Server Deployment folder, select a Windows scripted installation job. Drag the
job to the server blade in the Computers pane.
2. Select Run this job immediately, and click OK.
3. To view the progress of the job, double-click the computer in the job's computer history.

Reconfiguring the server blade

By default the Windows scripted installation job configures the computer name as the console display name
and configures the network as DHCP.
If you need to reconfigure the server:
1. In the Computers pane, right-click the blade and click Configure.
2. Click Microsoft Networking, and enter a new computer name and a new workgroup or domain name.
3. Click TCP/IP, and enter the appropriate IP information.
4. Click OK.
5. Select Run this job immediately, and click OK.
6. If the Windows scripted installation job is still running, click OK when the warning message appears.

Vulnerability scanning and deploying patches and fixes

This section describes the setup and use of the HP Vulnerability and Patch Management Pack; scanning
functionality.

HP Vulnerability and Patch Management Pack (VPM) overview

The following figure illustrates the process for using Vulnerability and Patch Management.
78 Deploying and securing servers