HP Xw460c - ProLiant - Blade Workstation User Manual page 26

4. Enter the license key in the spaces provided. Press Tab or click inside a box to move between boxes.
The Activation key box advances as you enter data. Click Licensing to clear the boxes and reload
the page.
5. Click Install.
6. Click OK.
To create a script that enables licenses to be pushed from a central point and to update and activate the
license key, enter the following from the command line interface:
set / map1 license=1234500000678910000000001
You can also perform other license operations, such as Show and Delete, and use the command line interface
with SSH.
IMPORTANT:
the Level of Data Returned is set to Enabled. This setting enables HP SIM to discover the remote
management processor and to associate the device with the host server.
After you apply a license on the iLO 2, you must remotely collect the iLO2 licenses onto the CMS.
1. Navigate to the HP SIM License Manager. In HP SIM, select Deploy License Manager.
2. Click Collect Remote Licenses Info.
3. Select your iLO 2.
4. Click Apply, and then click Next.
5. (Optional) If the iLO 2 credentials require an update:
a. Click Update Credentials.
b. Enter the credentials, and click OK.
c. Click Retry.
26 Licensing HP Insight Control Environment Suites
Within the iLO 2 interface, Administration SNMP/Insight Manager Settings, make sure